🚚 Free Worldwide Shipping on All Orders!Shop Now
15KG Olympic Barbell with 120KG Bumper Plate Package
In Stock, Ready to Ship 🏋️ 120KG Complete Bundle 🚚 Australia-Wide Delivery 🔇 Rubber Bumper Plates
15KG Olympic Barbell with 120KG Bumper Plate Package Complete Olympic Barbell Set With Weights | 15KG Bar + 6 Rubber Bumper Plates + Lockjaw Collars | Australia
This Olympic barbell with 120KG bumper plate package is a complete Olympic barbell set with weights, built for anyone setting up a home gym, garage gym or studio from scratch. It pairs a 15KG Olympic barbell (28mm knurled shaft, 50mm sleeves, rated to 500LB / 227KG) with a full set of six rubber Olympic bumper plates (2×15KG, 2×20KG, 2×25KG) and a pair of Lockjaw quick-release collars, for 120KG of total loadable weight in one order.
Rubber bumper plates protect your floor and cut down noise on every rep and drop, which matters if you are training in a garage, townhouse or shared building. This bundle is supplied as a complete barbell weight set rather than separate components, so there is no need to source a bar and plates individually or check sleeve compatibility yourself.
Below you will find the full specification, what is included, honest pros and cons, and answers to the most common questions buyers ask before purchasing an Olympic barbell set with weights in Australia.
120KG Total Loadable Weight
227KG Barbell Capacity (500LB)
6 Rubber Bumper Plates
50mm Olympic Sleeve Standard
Why buy a complete Olympic barbell set with weights instead of separate parts?
Sourcing a barbell, bumper plates and collars individually generally costs more than buying them as a package, and there is always a risk of buying a bar or plate that is not actually compatible. This 120KG bundle gives you a full working weight range, from around 45KG (bar plus the smallest pair of plates) right up to the full 120KG, covering the major compound lifts for beginner through intermediate training without an immediate follow-up purchase.
Sourcing a barbell, bumper plates and collars individually generally costs more than buying them as a package, and there is always a risk of buying a bar or plate that is not actually compatible. This 120KG bundle gives you a full working weight range, from around 45KG (bar plus the smallest pair of plates) right up to the full 120KG, covering the major compound lifts for beginner through intermediate training without an immediate follow-up purchase.
What's Included With This Olympic Barbell Set
1 × Olympic Barbell, 15KG Chrome-finish bar, 28mm knurled shaft, 50mm Olympic sleeves. Rated to 500LB (227KG). Suits squats, deadlifts, presses and rows.
2 × 15KG Rubber Bumper Plates 50mm centre hole. Noise reduction and floor protection on drops. 30KG per pair.
2 × 20KG Rubber Bumper Plates Built for high-rep training and barbell drops. Consistent diameter for clean, even floor contact. 40KG per pair.
2 × 25KG Rubber Bumper Plates Heavier-load plates for compound lifts and progressive overload. Thick rubber construction. 50KG per pair.
1 × Pair Lockjaw Collars Quick-lock spring collars that secure plates on the sleeve in seconds and prevent plate shift during dynamic lifts.
Total Loadable Weight: 120KG 15KG bar plus 105KG of plates equals 120KG total, covering a full progressive training range.
Why This Barbell and Weight Set Works
50mm Olympic Sleeve Standard All plates use the universal 50mm Olympic standard, compatible with every Olympic barbell, power rack and squat stand in our range.
Rubber Bumper Plates Protect Floors Rubber construction absorbs impact on every rep and drop, protecting concrete, timber and rubber gym flooring.
Built for Progressive Overload Three plate increments (15KG, 20KG, 25KG) allow systematic load progression as you get stronger.
28mm Knurled Barbell Shaft Standard diameter with knurling for secure grip across squats, deadlifts, bench press, overhead press and rows.
Lockjaw Quick-Release Collars Fast-locking collars stop plates moving mid-set and let you change loads in seconds between exercises.
Complete Set, One Delivery Bar, plates and collars arrive together. Pair with a bench or rack to unlock the full exercise library.
Build Quality and Plate Construction
The barbell uses a chrome finish over a solid steel shaft, with a 28mm diameter that suits most lifters across squats, presses, rows and deadlifts. The 50mm sleeves rotate to reduce wrist strain on barbell cycling movements such as cleans and snatches.
Each bumper plate is rubber-coated around a steel hub, with a 50mm centre bore matching the Olympic sleeve standard. The rubber compound is dense enough to handle regular dropping from overhead and floor-level positions without premature wear.
Shaft Diameter 28mm, standard Olympic grip
Sleeve Diameter 50mm, universal Olympic standard
Bar Finish Chrome
Bar Capacity 500LB / 227KG
Exercise Library
Compound Strength
- Deadlift, conventional and sumo
- Barbell back squat
- Bench press (with bench)
- Overhead press (OHP)
- Romanian deadlift (RDL)
Pulling and Rowing
- Bent-over barbell row
- Pendlay row
- Barbell shrug
- Barbell hip thrust
- Rack pull (with rack)
Olympic and Functional
- Power clean and hang clean
- Push press and push jerk
- Barbell thrusters
- Front squat
- Barbell cycling for WODs
Accessory Lifts
- Barbell curl, straight bar
- Skull crusher
- Good mornings
- Landmine press (with attachment)
- Floor press
Full Olympic Barbell Set Technical Details
| Bundle Total Weight | 120KG (bar plus plates) |
| Barbell Weight | 15KG |
| Barbell Shaft Diameter | 28mm, standard Olympic grip |
| Sleeve Diameter | 50mm, universal Olympic plate standard |
| Barbell Capacity | 500LB / 227KG |
| Barbell Finish | Chrome |
| Plates Included | 2×15KG, 2×20KG, 2×25KG rubber bumper plates |
| Plate Construction | Rubber-coated Olympic bumper plates, 50mm centre hole |
| Collars Included | Lockjaw quick-release collar pair |
| Warranty | To confirm |
| Compatible With | All Olympic barbells, power racks, squat stands and functional trainers with 50mm sleeves |
| Best For | Home gyms, garage gyms, PT studios, CrossFit, powerlifting, functional fitness |
How to Load This Set for Progressive Overload
| Total Bar Weight | Plate Configuration | Best For |
|---|---|---|
| 15KG | Bar only | Technique work, warm-up, beginners |
| 45KG | Bar + 2×15KG | Beginner compound lifts, OHP, rows |
| 55KG | Bar + 2×20KG | Intermediate deadlift, squat, bench |
| 65KG | Bar + 2×25KG | Intermediate to advanced compound lifts |
| 75KG | Bar + 2×15KG + 2×15KG | Progressive squat and deadlift loading |
| 95KG | Bar + 2×20KG + 2×20KG | Heavier intermediate compound training |
| 120KG | Bar + full plate set | Advanced training, full bundle loaded |
Pros and Cons
✓ Pros
- Complete Olympic barbell set with weights in one order
- Rubber bumper plates protect floors and reduce noise
- Three plate sizes support systematic progressive overload
- 50mm Olympic standard fits all racks and barbells
- 15KG bar suits most male and female lifters
- 500LB / 227KG bar capacity will not be outgrown easily
✗ Cons
- No change plates included, smallest increment is 15KG per side
- No bench or rack included, required for bench press and supported squats
- 15KG bar only. For heavier powerlifting training, a 20KG bar may suit better
- Combined weight means freight delivery, not a small parcel
The Right Olympic Barbell Set For
- Home gym beginners A complete first weightlifting set covering every major compound lift, with no need to buy a bar and plates separately or check compatibility yourself.
- Garage gym owners building from scratch 120KG of rubber bumper plates protects concrete floors and keeps noise down for early morning and late night sessions.
- CrossFit athletes training at home Rubber bumper plates are the standard choice for Olympic lifting at home, and this set covers common plate sizes used in WOD programming.
- PT studios adding equipment A complete barbell and plate set for client strength training without sourcing components individually.
- Intermediate lifters topping up an existing setup The 15KG, 20KG and 25KG spread fills gaps in an existing plate collection for finer load increments.
- Anyone comparing barbell weight sets before buying If you have been searching for an Olympic barbell set with weights and comparing options against general retailers, the 50mm Olympic standard here ensures full compatibility with serious strength equipment, not just entry-level home gear.
Who should not buy this set: if you are after a barbell heavier than 15KG for serious powerlifting, or you specifically need iron plates rather than rubber bumper plates, this bundle is not the right fit. It also does not include a bench or rack, so if you need a fully supported squat or bench press setup on day one, budget for those separately.
Worried about comparing this against a cheaper "barbell weight set" from a general retailer?
Many lower-cost barbell weight sets use 25mm or 30mm standard bars and basic vinyl or cast plates that are not Olympic-compatible. This package uses the full 50mm Olympic sleeve standard throughout, the same standard used in commercial gyms and CrossFit facilities, so it will continue to work with any power rack, squat stand or functional trainer you add to your setup later.
Many lower-cost barbell weight sets use 25mm or 30mm standard bars and basic vinyl or cast plates that are not Olympic-compatible. This package uses the full 50mm Olympic sleeve standard throughout, the same standard used in commercial gyms and CrossFit facilities, so it will continue to work with any power rack, squat stand or functional trainer you add to your setup later.
See It In Person 10/202 Milperra Road, Milperra NSW 2214. Inspect the barbell and bumper plate construction in person before ordering. 📍 Get Directions
Showroom Hours Mon–Fri 9am–5pm Saturday by appointment only Sunday closed
Australia-Wide Delivery Tracked freight to all states and territories
Depot Pickup Available Pickup from Derrimut (Melbourne) or Archerfield (Brisbane)
Dispatch Timeframe To confirm at checkout based on current stock
Complete Your Home Gym Setup
Browse Power Racks & Squat Racks → Browse Dumbbells & Racks → Browse Gym Flooring → Browse Rack & Machine Attachments →
Frequently Asked Questions
Common Questions
An Olympic barbell set with weights is a bundle that includes an Olympic barbell (50mm sleeves, typically 15KG or 20KG) along with a matching set of weight plates and collars, sold together as one package. This 120KG package includes a 15KG Olympic barbell, six rubber bumper plates (2×15KG, 2×20KG, 2×25KG) and a pair of Lockjaw collars, giving you everything needed to start strength training without buying components separately.
The package includes 1 × 15KG Olympic barbell (28mm shaft, 50mm sleeves, 500LB rated, chrome finish), 2 × 15KG rubber bumper plates, 2 × 20KG rubber bumper plates, 2 × 25KG rubber bumper plates, and 1 pair of Lockjaw quick-release collars. Total loadable weight is 120KG when the bar and all plates are combined.
It is a strong choice for home gyms because it covers the full 50mm Olympic standard, includes rubber bumper plates rather than basic iron or vinyl plates, and gives a working weight range from around 45KG up to 120KG. Whether it is the best fit for you depends on your goals: if you train mainly Olympic lifts or CrossFit-style sessions, the rubber bumper plates and 500LB-rated bar are well suited. If you need a heavier 20KG competition bar specifically, a different bar may suit better.
Pricing is shown on this product page and may vary with current promotions or stock availability. Contact our team on 1300 247 888 or [email protected] for the current price, freight cost to your location, or to ask about any active package discounts.
Yes, this package is in stock and ready to ship. Place your order online or contact our Milperra showroom to confirm current stock levels and the next available dispatch date before you buy.
Many lower-cost barbell weight sets sold by general retailers use 25mm or 30mm standard bars with vinyl-coated or basic cast plates that are not Olympic-compatible. This package uses a full 28mm shaft, 50mm Olympic sleeve standard and rubber bumper plates throughout, the same standard used in commercial gyms, so it stays compatible with power racks, squat stands and functional trainers if you expand your setup later.
Rubber bumper plates are Olympic weight plates with a full rubber coating that absorbs impact when the bar is dropped or set down. They protect concrete, timber and rubber flooring from damage, reduce noise during drops and reps, and can be dropped safely during Olympic lifts, which you should not do with cast iron plates. They are the standard plate type used in CrossFit facilities and Olympic weightlifting gyms.
This package is primarily designed and priced for home gyms, garage gyms and small PT studios. The bar and plates are built to a solid commercial-style 50mm Olympic standard, but for a high-traffic commercial gym floor, we recommend speaking with our team about higher-volume commercial plate options.
Yes. The 15KG bar allows technique development at a manageable weight before adding plates, and the three plate sizes give progressive loading from 45KG up to the full 120KG. The rubber bumper plates also make it safer for beginners learning Olympic lifts where dropping the bar is part of the movement. Pairing this set with an adjustable bench and squat rack will unlock the full exercise library.
Yes. All plates use the standard 50mm Olympic centre hole that fits all Olympic barbells and power rack J-hooks designed for Olympic bars. They will not fit standard 25mm or 30mm bars, only Olympic 50mm equipment.
Not for every exercise. Deadlifts, Romanian deadlifts, rows, cleans, overhead press from the floor, barbell hip thrusts and floor press can all be done with just the barbell and plates. To access the full exercise library, including supported squats, bench press and rack pulls, you will need a power rack or squat stand and an adjustable bench.
At a minimum, allow enough floor space for the barbell length (around 2.2 metres) plus clearance on both ends for loading plates and standing safely during lifts such as deadlifts and rows. If you plan to squat or bench press, you will also need space for a rack or bench, and adequate ceiling height for overhead movements.
Yes. This package ships Australia-wide via tracked freight due to the combined weight of the bar and plates. Depot pickup is also available from Derrimut in Melbourne or Archerfield in Brisbane. Contact our team for an exact delivery estimate to your postcode.
Yes. You can inspect the barbell and bumper plate construction in person at our Milperra showroom, 10/202 Milperra Road, Milperra NSW 2214, open Monday to Friday 9am to 5pm and Saturday by appointment only.
Warranty terms are to be confirmed at the time of purchase. Contact our team on 1300 247 888 or [email protected] for current warranty details on the barbell and bumper plates before you order.
15KG Olympic Barbell with 120KG Bumper Plate Package: delivery areas across Australia
We ship this Olympic barbell set with weights Australia-wide, including Sydney, Melbourne, Brisbane, Adelaide, Perth, Canberra, Gold Coast, Newcastle, Wollongong, Hobart and regional areas across every state and territory. Depot pickup is available in Melbourne (Derrimut) and Brisbane (Archerfield), with showroom pickup available in Milperra, NSW.
We ship this Olympic barbell set with weights Australia-wide, including Sydney, Melbourne, Brisbane, Adelaide, Perth, Canberra, Gold Coast, Newcastle, Wollongong, Hobart and regional areas across every state and territory. Depot pickup is available in Melbourne (Derrimut) and Brisbane (Archerfield), with showroom pickup available in Milperra, NSW.
$135.20
Original: $450.68
-70%15KG Olympic Barbell with 120KG Bumper Plate Package—
$450.68
$135.2015KG Olympic Barbell with 120KG Bumper Plate Package
In Stock, Ready to Ship 🏋️ 120KG Complete Bundle 🚚 Australia-Wide Delivery 🔇 Rubber Bumper Plates
15KG Olympic Barbell with 120KG Bumper Plate Package Complete Olympic Barbell Set With Weights | 15KG Bar + 6 Rubber Bumper Plates + Lockjaw Collars | Australia
This Olympic barbell with 120KG bumper plate package is a complete Olympic barbell set with weights, built for anyone setting up a home gym, garage gym or studio from scratch. It pairs a 15KG Olympic barbell (28mm knurled shaft, 50mm sleeves, rated to 500LB / 227KG) with a full set of six rubber Olympic bumper plates (2×15KG, 2×20KG, 2×25KG) and a pair of Lockjaw quick-release collars, for 120KG of total loadable weight in one order.
Rubber bumper plates protect your floor and cut down noise on every rep and drop, which matters if you are training in a garage, townhouse or shared building. This bundle is supplied as a complete barbell weight set rather than separate components, so there is no need to source a bar and plates individually or check sleeve compatibility yourself.
Below you will find the full specification, what is included, honest pros and cons, and answers to the most common questions buyers ask before purchasing an Olympic barbell set with weights in Australia.
120KG Total Loadable Weight
227KG Barbell Capacity (500LB)
6 Rubber Bumper Plates
50mm Olympic Sleeve Standard
Why buy a complete Olympic barbell set with weights instead of separate parts?
Sourcing a barbell, bumper plates and collars individually generally costs more than buying them as a package, and there is always a risk of buying a bar or plate that is not actually compatible. This 120KG bundle gives you a full working weight range, from around 45KG (bar plus the smallest pair of plates) right up to the full 120KG, covering the major compound lifts for beginner through intermediate training without an immediate follow-up purchase.
Sourcing a barbell, bumper plates and collars individually generally costs more than buying them as a package, and there is always a risk of buying a bar or plate that is not actually compatible. This 120KG bundle gives you a full working weight range, from around 45KG (bar plus the smallest pair of plates) right up to the full 120KG, covering the major compound lifts for beginner through intermediate training without an immediate follow-up purchase.
What's Included With This Olympic Barbell Set
1 × Olympic Barbell, 15KG Chrome-finish bar, 28mm knurled shaft, 50mm Olympic sleeves. Rated to 500LB (227KG). Suits squats, deadlifts, presses and rows.
2 × 15KG Rubber Bumper Plates 50mm centre hole. Noise reduction and floor protection on drops. 30KG per pair.
2 × 20KG Rubber Bumper Plates Built for high-rep training and barbell drops. Consistent diameter for clean, even floor contact. 40KG per pair.
2 × 25KG Rubber Bumper Plates Heavier-load plates for compound lifts and progressive overload. Thick rubber construction. 50KG per pair.
1 × Pair Lockjaw Collars Quick-lock spring collars that secure plates on the sleeve in seconds and prevent plate shift during dynamic lifts.
Total Loadable Weight: 120KG 15KG bar plus 105KG of plates equals 120KG total, covering a full progressive training range.
Why This Barbell and Weight Set Works
50mm Olympic Sleeve Standard All plates use the universal 50mm Olympic standard, compatible with every Olympic barbell, power rack and squat stand in our range.
Rubber Bumper Plates Protect Floors Rubber construction absorbs impact on every rep and drop, protecting concrete, timber and rubber gym flooring.
Built for Progressive Overload Three plate increments (15KG, 20KG, 25KG) allow systematic load progression as you get stronger.
28mm Knurled Barbell Shaft Standard diameter with knurling for secure grip across squats, deadlifts, bench press, overhead press and rows.
Lockjaw Quick-Release Collars Fast-locking collars stop plates moving mid-set and let you change loads in seconds between exercises.
Complete Set, One Delivery Bar, plates and collars arrive together. Pair with a bench or rack to unlock the full exercise library.
Build Quality and Plate Construction
The barbell uses a chrome finish over a solid steel shaft, with a 28mm diameter that suits most lifters across squats, presses, rows and deadlifts. The 50mm sleeves rotate to reduce wrist strain on barbell cycling movements such as cleans and snatches.
Each bumper plate is rubber-coated around a steel hub, with a 50mm centre bore matching the Olympic sleeve standard. The rubber compound is dense enough to handle regular dropping from overhead and floor-level positions without premature wear.
Shaft Diameter 28mm, standard Olympic grip
Sleeve Diameter 50mm, universal Olympic standard
Bar Finish Chrome
Bar Capacity 500LB / 227KG
Exercise Library
Compound Strength
- Deadlift, conventional and sumo
- Barbell back squat
- Bench press (with bench)
- Overhead press (OHP)
- Romanian deadlift (RDL)
Pulling and Rowing
- Bent-over barbell row
- Pendlay row
- Barbell shrug
- Barbell hip thrust
- Rack pull (with rack)
Olympic and Functional
- Power clean and hang clean
- Push press and push jerk
- Barbell thrusters
- Front squat
- Barbell cycling for WODs
Accessory Lifts
- Barbell curl, straight bar
- Skull crusher
- Good mornings
- Landmine press (with attachment)
- Floor press
Full Olympic Barbell Set Technical Details
| Bundle Total Weight | 120KG (bar plus plates) |
| Barbell Weight | 15KG |
| Barbell Shaft Diameter | 28mm, standard Olympic grip |
| Sleeve Diameter | 50mm, universal Olympic plate standard |
| Barbell Capacity | 500LB / 227KG |
| Barbell Finish | Chrome |
| Plates Included | 2×15KG, 2×20KG, 2×25KG rubber bumper plates |
| Plate Construction | Rubber-coated Olympic bumper plates, 50mm centre hole |
| Collars Included | Lockjaw quick-release collar pair |
| Warranty | To confirm |
| Compatible With | All Olympic barbells, power racks, squat stands and functional trainers with 50mm sleeves |
| Best For | Home gyms, garage gyms, PT studios, CrossFit, powerlifting, functional fitness |
How to Load This Set for Progressive Overload
| Total Bar Weight | Plate Configuration | Best For |
|---|---|---|
| 15KG | Bar only | Technique work, warm-up, beginners |
| 45KG | Bar + 2×15KG | Beginner compound lifts, OHP, rows |
| 55KG | Bar + 2×20KG | Intermediate deadlift, squat, bench |
| 65KG | Bar + 2×25KG | Intermediate to advanced compound lifts |
| 75KG | Bar + 2×15KG + 2×15KG | Progressive squat and deadlift loading |
| 95KG | Bar + 2×20KG + 2×20KG | Heavier intermediate compound training |
| 120KG | Bar + full plate set | Advanced training, full bundle loaded |
Pros and Cons
✓ Pros
- Complete Olympic barbell set with weights in one order
- Rubber bumper plates protect floors and reduce noise
- Three plate sizes support systematic progressive overload
- 50mm Olympic standard fits all racks and barbells
- 15KG bar suits most male and female lifters
- 500LB / 227KG bar capacity will not be outgrown easily
✗ Cons
- No change plates included, smallest increment is 15KG per side
- No bench or rack included, required for bench press and supported squats
- 15KG bar only. For heavier powerlifting training, a 20KG bar may suit better
- Combined weight means freight delivery, not a small parcel
The Right Olympic Barbell Set For
- Home gym beginners A complete first weightlifting set covering every major compound lift, with no need to buy a bar and plates separately or check compatibility yourself.
- Garage gym owners building from scratch 120KG of rubber bumper plates protects concrete floors and keeps noise down for early morning and late night sessions.
- CrossFit athletes training at home Rubber bumper plates are the standard choice for Olympic lifting at home, and this set covers common plate sizes used in WOD programming.
- PT studios adding equipment A complete barbell and plate set for client strength training without sourcing components individually.
- Intermediate lifters topping up an existing setup The 15KG, 20KG and 25KG spread fills gaps in an existing plate collection for finer load increments.
- Anyone comparing barbell weight sets before buying If you have been searching for an Olympic barbell set with weights and comparing options against general retailers, the 50mm Olympic standard here ensures full compatibility with serious strength equipment, not just entry-level home gear.
Who should not buy this set: if you are after a barbell heavier than 15KG for serious powerlifting, or you specifically need iron plates rather than rubber bumper plates, this bundle is not the right fit. It also does not include a bench or rack, so if you need a fully supported squat or bench press setup on day one, budget for those separately.
Worried about comparing this against a cheaper "barbell weight set" from a general retailer?
Many lower-cost barbell weight sets use 25mm or 30mm standard bars and basic vinyl or cast plates that are not Olympic-compatible. This package uses the full 50mm Olympic sleeve standard throughout, the same standard used in commercial gyms and CrossFit facilities, so it will continue to work with any power rack, squat stand or functional trainer you add to your setup later.
Many lower-cost barbell weight sets use 25mm or 30mm standard bars and basic vinyl or cast plates that are not Olympic-compatible. This package uses the full 50mm Olympic sleeve standard throughout, the same standard used in commercial gyms and CrossFit facilities, so it will continue to work with any power rack, squat stand or functional trainer you add to your setup later.
See It In Person 10/202 Milperra Road, Milperra NSW 2214. Inspect the barbell and bumper plate construction in person before ordering. 📍 Get Directions
Showroom Hours Mon–Fri 9am–5pm Saturday by appointment only Sunday closed
Australia-Wide Delivery Tracked freight to all states and territories
Depot Pickup Available Pickup from Derrimut (Melbourne) or Archerfield (Brisbane)
Dispatch Timeframe To confirm at checkout based on current stock
Complete Your Home Gym Setup
Browse Power Racks & Squat Racks → Browse Dumbbells & Racks → Browse Gym Flooring → Browse Rack & Machine Attachments →
Frequently Asked Questions
Common Questions
An Olympic barbell set with weights is a bundle that includes an Olympic barbell (50mm sleeves, typically 15KG or 20KG) along with a matching set of weight plates and collars, sold together as one package. This 120KG package includes a 15KG Olympic barbell, six rubber bumper plates (2×15KG, 2×20KG, 2×25KG) and a pair of Lockjaw collars, giving you everything needed to start strength training without buying components separately.
The package includes 1 × 15KG Olympic barbell (28mm shaft, 50mm sleeves, 500LB rated, chrome finish), 2 × 15KG rubber bumper plates, 2 × 20KG rubber bumper plates, 2 × 25KG rubber bumper plates, and 1 pair of Lockjaw quick-release collars. Total loadable weight is 120KG when the bar and all plates are combined.
It is a strong choice for home gyms because it covers the full 50mm Olympic standard, includes rubber bumper plates rather than basic iron or vinyl plates, and gives a working weight range from around 45KG up to 120KG. Whether it is the best fit for you depends on your goals: if you train mainly Olympic lifts or CrossFit-style sessions, the rubber bumper plates and 500LB-rated bar are well suited. If you need a heavier 20KG competition bar specifically, a different bar may suit better.
Pricing is shown on this product page and may vary with current promotions or stock availability. Contact our team on 1300 247 888 or [email protected] for the current price, freight cost to your location, or to ask about any active package discounts.
Yes, this package is in stock and ready to ship. Place your order online or contact our Milperra showroom to confirm current stock levels and the next available dispatch date before you buy.
Many lower-cost barbell weight sets sold by general retailers use 25mm or 30mm standard bars with vinyl-coated or basic cast plates that are not Olympic-compatible. This package uses a full 28mm shaft, 50mm Olympic sleeve standard and rubber bumper plates throughout, the same standard used in commercial gyms, so it stays compatible with power racks, squat stands and functional trainers if you expand your setup later.
Rubber bumper plates are Olympic weight plates with a full rubber coating that absorbs impact when the bar is dropped or set down. They protect concrete, timber and rubber flooring from damage, reduce noise during drops and reps, and can be dropped safely during Olympic lifts, which you should not do with cast iron plates. They are the standard plate type used in CrossFit facilities and Olympic weightlifting gyms.
This package is primarily designed and priced for home gyms, garage gyms and small PT studios. The bar and plates are built to a solid commercial-style 50mm Olympic standard, but for a high-traffic commercial gym floor, we recommend speaking with our team about higher-volume commercial plate options.
Yes. The 15KG bar allows technique development at a manageable weight before adding plates, and the three plate sizes give progressive loading from 45KG up to the full 120KG. The rubber bumper plates also make it safer for beginners learning Olympic lifts where dropping the bar is part of the movement. Pairing this set with an adjustable bench and squat rack will unlock the full exercise library.
Yes. All plates use the standard 50mm Olympic centre hole that fits all Olympic barbells and power rack J-hooks designed for Olympic bars. They will not fit standard 25mm or 30mm bars, only Olympic 50mm equipment.
Not for every exercise. Deadlifts, Romanian deadlifts, rows, cleans, overhead press from the floor, barbell hip thrusts and floor press can all be done with just the barbell and plates. To access the full exercise library, including supported squats, bench press and rack pulls, you will need a power rack or squat stand and an adjustable bench.
At a minimum, allow enough floor space for the barbell length (around 2.2 metres) plus clearance on both ends for loading plates and standing safely during lifts such as deadlifts and rows. If you plan to squat or bench press, you will also need space for a rack or bench, and adequate ceiling height for overhead movements.
Yes. This package ships Australia-wide via tracked freight due to the combined weight of the bar and plates. Depot pickup is also available from Derrimut in Melbourne or Archerfield in Brisbane. Contact our team for an exact delivery estimate to your postcode.
Yes. You can inspect the barbell and bumper plate construction in person at our Milperra showroom, 10/202 Milperra Road, Milperra NSW 2214, open Monday to Friday 9am to 5pm and Saturday by appointment only.
Warranty terms are to be confirmed at the time of purchase. Contact our team on 1300 247 888 or [email protected] for current warranty details on the barbell and bumper plates before you order.
15KG Olympic Barbell with 120KG Bumper Plate Package: delivery areas across Australia
We ship this Olympic barbell set with weights Australia-wide, including Sydney, Melbourne, Brisbane, Adelaide, Perth, Canberra, Gold Coast, Newcastle, Wollongong, Hobart and regional areas across every state and territory. Depot pickup is available in Melbourne (Derrimut) and Brisbane (Archerfield), with showroom pickup available in Milperra, NSW.
We ship this Olympic barbell set with weights Australia-wide, including Sydney, Melbourne, Brisbane, Adelaide, Perth, Canberra, Gold Coast, Newcastle, Wollongong, Hobart and regional areas across every state and territory. Depot pickup is available in Melbourne (Derrimut) and Brisbane (Archerfield), with showroom pickup available in Milperra, NSW.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
In Stock, Ready to Ship 🏋️ 120KG Complete Bundle 🚚 Australia-Wide Delivery 🔇 Rubber Bumper Plates
15KG Olympic Barbell with 120KG Bumper Plate Package Complete Olympic Barbell Set With Weights | 15KG Bar + 6 Rubber Bumper Plates + Lockjaw Collars | Australia
This Olympic barbell with 120KG bumper plate package is a complete Olympic barbell set with weights, built for anyone setting up a home gym, garage gym or studio from scratch. It pairs a 15KG Olympic barbell (28mm knurled shaft, 50mm sleeves, rated to 500LB / 227KG) with a full set of six rubber Olympic bumper plates (2×15KG, 2×20KG, 2×25KG) and a pair of Lockjaw quick-release collars, for 120KG of total loadable weight in one order.
Rubber bumper plates protect your floor and cut down noise on every rep and drop, which matters if you are training in a garage, townhouse or shared building. This bundle is supplied as a complete barbell weight set rather than separate components, so there is no need to source a bar and plates individually or check sleeve compatibility yourself.
Below you will find the full specification, what is included, honest pros and cons, and answers to the most common questions buyers ask before purchasing an Olympic barbell set with weights in Australia.
120KG Total Loadable Weight
227KG Barbell Capacity (500LB)
6 Rubber Bumper Plates
50mm Olympic Sleeve Standard
Why buy a complete Olympic barbell set with weights instead of separate parts?
Sourcing a barbell, bumper plates and collars individually generally costs more than buying them as a package, and there is always a risk of buying a bar or plate that is not actually compatible. This 120KG bundle gives you a full working weight range, from around 45KG (bar plus the smallest pair of plates) right up to the full 120KG, covering the major compound lifts for beginner through intermediate training without an immediate follow-up purchase.
Sourcing a barbell, bumper plates and collars individually generally costs more than buying them as a package, and there is always a risk of buying a bar or plate that is not actually compatible. This 120KG bundle gives you a full working weight range, from around 45KG (bar plus the smallest pair of plates) right up to the full 120KG, covering the major compound lifts for beginner through intermediate training without an immediate follow-up purchase.
What's Included With This Olympic Barbell Set
1 × Olympic Barbell, 15KG Chrome-finish bar, 28mm knurled shaft, 50mm Olympic sleeves. Rated to 500LB (227KG). Suits squats, deadlifts, presses and rows.
2 × 15KG Rubber Bumper Plates 50mm centre hole. Noise reduction and floor protection on drops. 30KG per pair.
2 × 20KG Rubber Bumper Plates Built for high-rep training and barbell drops. Consistent diameter for clean, even floor contact. 40KG per pair.
2 × 25KG Rubber Bumper Plates Heavier-load plates for compound lifts and progressive overload. Thick rubber construction. 50KG per pair.
1 × Pair Lockjaw Collars Quick-lock spring collars that secure plates on the sleeve in seconds and prevent plate shift during dynamic lifts.
Total Loadable Weight: 120KG 15KG bar plus 105KG of plates equals 120KG total, covering a full progressive training range.
Why This Barbell and Weight Set Works
50mm Olympic Sleeve Standard All plates use the universal 50mm Olympic standard, compatible with every Olympic barbell, power rack and squat stand in our range.
Rubber Bumper Plates Protect Floors Rubber construction absorbs impact on every rep and drop, protecting concrete, timber and rubber gym flooring.
Built for Progressive Overload Three plate increments (15KG, 20KG, 25KG) allow systematic load progression as you get stronger.
28mm Knurled Barbell Shaft Standard diameter with knurling for secure grip across squats, deadlifts, bench press, overhead press and rows.
Lockjaw Quick-Release Collars Fast-locking collars stop plates moving mid-set and let you change loads in seconds between exercises.
Complete Set, One Delivery Bar, plates and collars arrive together. Pair with a bench or rack to unlock the full exercise library.
Build Quality and Plate Construction
The barbell uses a chrome finish over a solid steel shaft, with a 28mm diameter that suits most lifters across squats, presses, rows and deadlifts. The 50mm sleeves rotate to reduce wrist strain on barbell cycling movements such as cleans and snatches.
Each bumper plate is rubber-coated around a steel hub, with a 50mm centre bore matching the Olympic sleeve standard. The rubber compound is dense enough to handle regular dropping from overhead and floor-level positions without premature wear.
Shaft Diameter 28mm, standard Olympic grip
Sleeve Diameter 50mm, universal Olympic standard
Bar Finish Chrome
Bar Capacity 500LB / 227KG
Exercise Library
Compound Strength
- Deadlift, conventional and sumo
- Barbell back squat
- Bench press (with bench)
- Overhead press (OHP)
- Romanian deadlift (RDL)
Pulling and Rowing
- Bent-over barbell row
- Pendlay row
- Barbell shrug
- Barbell hip thrust
- Rack pull (with rack)
Olympic and Functional
- Power clean and hang clean
- Push press and push jerk
- Barbell thrusters
- Front squat
- Barbell cycling for WODs
Accessory Lifts
- Barbell curl, straight bar
- Skull crusher
- Good mornings
- Landmine press (with attachment)
- Floor press
Full Olympic Barbell Set Technical Details
| Bundle Total Weight | 120KG (bar plus plates) |
| Barbell Weight | 15KG |
| Barbell Shaft Diameter | 28mm, standard Olympic grip |
| Sleeve Diameter | 50mm, universal Olympic plate standard |
| Barbell Capacity | 500LB / 227KG |
| Barbell Finish | Chrome |
| Plates Included | 2×15KG, 2×20KG, 2×25KG rubber bumper plates |
| Plate Construction | Rubber-coated Olympic bumper plates, 50mm centre hole |
| Collars Included | Lockjaw quick-release collar pair |
| Warranty | To confirm |
| Compatible With | All Olympic barbells, power racks, squat stands and functional trainers with 50mm sleeves |
| Best For | Home gyms, garage gyms, PT studios, CrossFit, powerlifting, functional fitness |
How to Load This Set for Progressive Overload
| Total Bar Weight | Plate Configuration | Best For |
|---|---|---|
| 15KG | Bar only | Technique work, warm-up, beginners |
| 45KG | Bar + 2×15KG | Beginner compound lifts, OHP, rows |
| 55KG | Bar + 2×20KG | Intermediate deadlift, squat, bench |
| 65KG | Bar + 2×25KG | Intermediate to advanced compound lifts |
| 75KG | Bar + 2×15KG + 2×15KG | Progressive squat and deadlift loading |
| 95KG | Bar + 2×20KG + 2×20KG | Heavier intermediate compound training |
| 120KG | Bar + full plate set | Advanced training, full bundle loaded |
Pros and Cons
✓ Pros
- Complete Olympic barbell set with weights in one order
- Rubber bumper plates protect floors and reduce noise
- Three plate sizes support systematic progressive overload
- 50mm Olympic standard fits all racks and barbells
- 15KG bar suits most male and female lifters
- 500LB / 227KG bar capacity will not be outgrown easily
✗ Cons
- No change plates included, smallest increment is 15KG per side
- No bench or rack included, required for bench press and supported squats
- 15KG bar only. For heavier powerlifting training, a 20KG bar may suit better
- Combined weight means freight delivery, not a small parcel
The Right Olympic Barbell Set For
- Home gym beginners A complete first weightlifting set covering every major compound lift, with no need to buy a bar and plates separately or check compatibility yourself.
- Garage gym owners building from scratch 120KG of rubber bumper plates protects concrete floors and keeps noise down for early morning and late night sessions.
- CrossFit athletes training at home Rubber bumper plates are the standard choice for Olympic lifting at home, and this set covers common plate sizes used in WOD programming.
- PT studios adding equipment A complete barbell and plate set for client strength training without sourcing components individually.
- Intermediate lifters topping up an existing setup The 15KG, 20KG and 25KG spread fills gaps in an existing plate collection for finer load increments.
- Anyone comparing barbell weight sets before buying If you have been searching for an Olympic barbell set with weights and comparing options against general retailers, the 50mm Olympic standard here ensures full compatibility with serious strength equipment, not just entry-level home gear.
Who should not buy this set: if you are after a barbell heavier than 15KG for serious powerlifting, or you specifically need iron plates rather than rubber bumper plates, this bundle is not the right fit. It also does not include a bench or rack, so if you need a fully supported squat or bench press setup on day one, budget for those separately.
Worried about comparing this against a cheaper "barbell weight set" from a general retailer?
Many lower-cost barbell weight sets use 25mm or 30mm standard bars and basic vinyl or cast plates that are not Olympic-compatible. This package uses the full 50mm Olympic sleeve standard throughout, the same standard used in commercial gyms and CrossFit facilities, so it will continue to work with any power rack, squat stand or functional trainer you add to your setup later.
Many lower-cost barbell weight sets use 25mm or 30mm standard bars and basic vinyl or cast plates that are not Olympic-compatible. This package uses the full 50mm Olympic sleeve standard throughout, the same standard used in commercial gyms and CrossFit facilities, so it will continue to work with any power rack, squat stand or functional trainer you add to your setup later.
See It In Person 10/202 Milperra Road, Milperra NSW 2214. Inspect the barbell and bumper plate construction in person before ordering. 📍 Get Directions
Showroom Hours Mon–Fri 9am–5pm Saturday by appointment only Sunday closed
Australia-Wide Delivery Tracked freight to all states and territories
Depot Pickup Available Pickup from Derrimut (Melbourne) or Archerfield (Brisbane)
Dispatch Timeframe To confirm at checkout based on current stock
Complete Your Home Gym Setup
Browse Power Racks & Squat Racks → Browse Dumbbells & Racks → Browse Gym Flooring → Browse Rack & Machine Attachments →
Frequently Asked Questions
Common Questions
An Olympic barbell set with weights is a bundle that includes an Olympic barbell (50mm sleeves, typically 15KG or 20KG) along with a matching set of weight plates and collars, sold together as one package. This 120KG package includes a 15KG Olympic barbell, six rubber bumper plates (2×15KG, 2×20KG, 2×25KG) and a pair of Lockjaw collars, giving you everything needed to start strength training without buying components separately.
The package includes 1 × 15KG Olympic barbell (28mm shaft, 50mm sleeves, 500LB rated, chrome finish), 2 × 15KG rubber bumper plates, 2 × 20KG rubber bumper plates, 2 × 25KG rubber bumper plates, and 1 pair of Lockjaw quick-release collars. Total loadable weight is 120KG when the bar and all plates are combined.
It is a strong choice for home gyms because it covers the full 50mm Olympic standard, includes rubber bumper plates rather than basic iron or vinyl plates, and gives a working weight range from around 45KG up to 120KG. Whether it is the best fit for you depends on your goals: if you train mainly Olympic lifts or CrossFit-style sessions, the rubber bumper plates and 500LB-rated bar are well suited. If you need a heavier 20KG competition bar specifically, a different bar may suit better.
Pricing is shown on this product page and may vary with current promotions or stock availability. Contact our team on 1300 247 888 or [email protected] for the current price, freight cost to your location, or to ask about any active package discounts.
Yes, this package is in stock and ready to ship. Place your order online or contact our Milperra showroom to confirm current stock levels and the next available dispatch date before you buy.
Many lower-cost barbell weight sets sold by general retailers use 25mm or 30mm standard bars with vinyl-coated or basic cast plates that are not Olympic-compatible. This package uses a full 28mm shaft, 50mm Olympic sleeve standard and rubber bumper plates throughout, the same standard used in commercial gyms, so it stays compatible with power racks, squat stands and functional trainers if you expand your setup later.
Rubber bumper plates are Olympic weight plates with a full rubber coating that absorbs impact when the bar is dropped or set down. They protect concrete, timber and rubber flooring from damage, reduce noise during drops and reps, and can be dropped safely during Olympic lifts, which you should not do with cast iron plates. They are the standard plate type used in CrossFit facilities and Olympic weightlifting gyms.
This package is primarily designed and priced for home gyms, garage gyms and small PT studios. The bar and plates are built to a solid commercial-style 50mm Olympic standard, but for a high-traffic commercial gym floor, we recommend speaking with our team about higher-volume commercial plate options.
Yes. The 15KG bar allows technique development at a manageable weight before adding plates, and the three plate sizes give progressive loading from 45KG up to the full 120KG. The rubber bumper plates also make it safer for beginners learning Olympic lifts where dropping the bar is part of the movement. Pairing this set with an adjustable bench and squat rack will unlock the full exercise library.
Yes. All plates use the standard 50mm Olympic centre hole that fits all Olympic barbells and power rack J-hooks designed for Olympic bars. They will not fit standard 25mm or 30mm bars, only Olympic 50mm equipment.
Not for every exercise. Deadlifts, Romanian deadlifts, rows, cleans, overhead press from the floor, barbell hip thrusts and floor press can all be done with just the barbell and plates. To access the full exercise library, including supported squats, bench press and rack pulls, you will need a power rack or squat stand and an adjustable bench.
At a minimum, allow enough floor space for the barbell length (around 2.2 metres) plus clearance on both ends for loading plates and standing safely during lifts such as deadlifts and rows. If you plan to squat or bench press, you will also need space for a rack or bench, and adequate ceiling height for overhead movements.
Yes. This package ships Australia-wide via tracked freight due to the combined weight of the bar and plates. Depot pickup is also available from Derrimut in Melbourne or Archerfield in Brisbane. Contact our team for an exact delivery estimate to your postcode.
Yes. You can inspect the barbell and bumper plate construction in person at our Milperra showroom, 10/202 Milperra Road, Milperra NSW 2214, open Monday to Friday 9am to 5pm and Saturday by appointment only.
Warranty terms are to be confirmed at the time of purchase. Contact our team on 1300 247 888 or [email protected] for current warranty details on the barbell and bumper plates before you order.
15KG Olympic Barbell with 120KG Bumper Plate Package: delivery areas across Australia
We ship this Olympic barbell set with weights Australia-wide, including Sydney, Melbourne, Brisbane, Adelaide, Perth, Canberra, Gold Coast, Newcastle, Wollongong, Hobart and regional areas across every state and territory. Depot pickup is available in Melbourne (Derrimut) and Brisbane (Archerfield), with showroom pickup available in Milperra, NSW.
We ship this Olympic barbell set with weights Australia-wide, including Sydney, Melbourne, Brisbane, Adelaide, Perth, Canberra, Gold Coast, Newcastle, Wollongong, Hobart and regional areas across every state and territory. Depot pickup is available in Melbourne (Derrimut) and Brisbane (Archerfield), with showroom pickup available in Milperra, NSW.
